ALPHAFLO H SERIES PUMP
AlphaFlo H series slurry pump were designed to produce high heads per stage at high pressures specially for long distance transport lines, which satisfy application duties with a single pump where others require multiple pumps in series
(Interchangeable with Warman HH Pump).
All OEM pump parts information are for reference only and AlphaFlo is not affilicated with OEM.
SLURRY PUMP MODELS
| ITEM NO. | PUMP SERIES | PUMP SIZE | PUMP FRAME TYPE | PUMP MODEL |
|---|---|---|---|---|
| 1 | HH | 1.5X1 | C | 1.5X1 CHH |
| 2 | HH | 3X2 | D/DD | 3X2 DHH |
| 3 | HH | 4X3 | E/EE | 4X3 EHH |
| 4 | HH | 6X4 | F/FF | 6X4 FHH |
| 5 | HH | 8X6 | G | 8X6 GHH |
FRAME PLATE LINER INSERT
AlphaFlo - After-market FPL insert
- FPL Insert (Back Liner) is one of the wet end parts and compires the inner pump casing with other throatbush (083) and volute liner (110).
- FPL insert is made of abrasion or corrosion resistant high chrome white iron with material code of A51.
- FPL insert part number description.
- CH1041-33MA51 - CH-1-041-33-M-A05
- CH = Pump frame Type.
- 1 = Pump discharge size ( inch)
- 041 = 3-digit pump part basic number
- 33 = Mechanical seal type
- M = Metric
- A51 = Material code
FPL INSERT PART NUMBERS
| NO. | PART NAME | OEM PART NO. | END CODE | MATERIAL | PUMP SERIES | PUMP SIZE | FRAME |
|---|---|---|---|---|---|---|---|
| 1 | FPL INSERT | CH1041-33MA51 | "-33" MECHANICAL SEAL | A51 | HH | 1.5X1 | C |
| 2 | FPL INSERT | DH2041HS1A51 | "HS1" HI-SEAL | A51 | HH | 3X2 | D |
| 3 | FPL INSERT | DH2041MS1MA51 | "MS1" MECHANICAL SEAL | A51 | HH | 3X2 | D |
| 4 | FPL INSERT | DH2041-19MA51 | "MS1" MECHANICAL SEAL | A51 | HH | 3X2 | D |
| 5 | FPL INSERT | EH3041-19MA51 | "MS1" MECHANICAL SEAL | A51 | HH | 4X3 | E |
| 6 | FPL INSERT | FH4041-19MA51 | "MS1" MECHANICAL SEAL | A51 | HH | 6X4 | F |
Contact Us
We’d love to hear from you. Email us via info@alphaflo.com
or message using the form below we’ll get back to you asap.